CONTROL CONCEPTS, INC. 16-BIT SCSI, IDE, FLOPPY, SERIAL & PARALLEL COMBINATION BOARD (VERSION 2) Data bus: 16-bit, ISA Size: Three-quarter-length, full-height card Hard drive supported: IDE (AT) Interface drive, SCSI drives (2) Floppy drives Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88 supported: drives [Image] CONNECTIONS Function Location Floppy drive interface 1 CN1 Floppy drive interface 2 CN2 Serial port 4 CN3 Serial port 3 CN4 Serial port 2 CN5 Serial port 1 CN6 Parallel port 1 CN7 IDE interface CN8 Parallel port 2 CN9 SCSI interface CN10 SCSI interface 2 CN11 USER CONFIGURABLE SETTINGS Function Location Setting » 2.88MB Floppy drive mode disabled JB1/A Open 2.88MB Floppy drive mode enabled JB1/A Pins 2 & 3 (w/pin 33 as 2nd enable line) 2.88MB Floppy drive mode enabled JB1/A Pins 1 & 2 (standard enabling) » Factory configured - do not alter JB3/A N/A » Factory configured - do not alter JB3/B N/A » Factory configured - do not alter JB3/C N/A » Factory configured - do not alter JB3/D N/A » No termination power to external SCSI JB6/A Open interface 5V termination power to external SCSI JB6/A Closed interface » Factory configured - do not alter JB6/D N/A » I/O Address 330h - 33Fh JB6/E Open I/O Address 230h - 23Fh JB6/E Closed » SCSI protocol asynchronous JB6/F Open SCSI protocol synchronous JB6/F Closed » SCSI device ID 7 JB6/G Open SCSI device ID 6 JB6/G Closed » SCSI parity enabled JB6/H Open SCSI parity disabled JB6/H Closed » Factory configured - do not alter JB6/K N/A » ROM enabled JB6/L Closed ROM disabled JB6/L Open » Factory configured - do not alter JB6/M N/A » Zero wait state disabled JB6/N Open Zero wait state enabled JB6/N Closed » Factory configured - do not alter JB/7 N/A IDE CONFIGURATION Setting JB1/B JB1/C » IDE interface enabled (address Pins 2 & 3 Pins 1 & 2 1F0h - 1F7h) closed closed IDE interface enabled (address Pins 1 & 2 Pins 1 & 2 170h - 177h) closed closed IDE interface disabled Pins 2 & 3 Pins 2 & 3 closed closed Reserved for future use Pins 1 & 2 Pins 1 & 2 closed closed FLOPPY DRIVE CONFIGURATION Setting JB1/D JB1/E » Floppy drive interface enabled Pins 2 & 3 Pins 1 & 2 (address 3F0h - 3F7h) closed closed Floppy drive interface enabled Pins 1 & 2 Pins 1 & 2 (address 370h - 377h) closed closed Floppy drive interface disabled Pins 2 & 3 Pins 2 & 3 closed closed Reserved for future use Pins 1 & 2 Pins 2 & 3 closed closed PRIMARY PARALLEL PORT CONFIGURATION Setting JB1/F JB1/G » Unidirectional mode enabled Pins 2 & 3 Pins 2 & 3 closed closed Bi-directional mode enabled Pins 1 & 2 Pins 2 & 3 closed closed Reserved for future use Pins 2 & 3 Pins 1 & 2 closed closed Reserved for future use Pins 1 & 2 Pins 1 & 2 closed closed PRIMARY PARALLEL PORT ADDRESS SELECT LPT JB1/H JB1/I » 1 Pins 2 & 3 Pins 1 & 2 closed closed 2 Pins 1 & 2 Pins 1 & 2 closed closed 3 Pins 1 & 2 Pins 2 & 3 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed PRIMARY PARALLEL PORT INTERRUPT SELECT IRQ JB4/E » IRQ7 Pins 1 & 2 closed IRQ5 Pins 2 & 3 closed SECOND PARALLEL PORT CONFIGURATION Setting JB2/A JB2/B » Unidirectional mode enabled Pins 2 & 3 Pins 2 & 3 closed closed Bi-directional mode enabled Pins 1 & 2 Pins 2 & 3 closed closed Reserved for future use Pins 2 & 3 Pins 1 & 2 closed closed Reserved for future use Pins 1 & 2 Pins 1 & 2 closed closed SECOND PARALLEL PORT ADDRESS SELECT LPT JB2/C JB2/D » LPT2 Pins 1 & 2 Pins 1 & 2 closed closed LPT1 Pins 2 & 3 Pins 1 & 2 closed closed LPT3 Pins 1 & 2 Pins 2 & 3 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed SECOND PARALLEL PORT INTERRUPT SELECT IRQ JB4/F » IRQ5 Pins 2 & 3 closed IRQ7 Pins 1 & 2 closed PRIMARY SERIAL PORT ADDRESS SELECT Port 1 (CN6) JB1/L JB1/M » COM1 Pins 1 & 2 Pins 1 & 2 closed closed COM2 Pins 2 & 3 Pins 1 & 2 closed closed COM3 Pins 1 & 2 Pins 2 & 3 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed PRIMARY SERIAL PORT INTERRUPT SELECT IRQ JB4/A » IRQ4 Pins 1 & 2 closed IRQ3 Pins 2 & 3 closed SECOND SERIAL PORT ADDRESS SELECT Port 2 (CN5) JB1/J JB1/K » COM2 Pins 1 & 2 Pins 1 & 2 closed closed COM1 Pins 2 & 3 Pins 1 & 2 closed closed COM4 Pins 1 & 2 Pins 2 & 3 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed SECOND SERIAL PORT INTERRUPT SELECT IRQ JB4/B » IRQ3 Pins 2 & 3 closed IRQ4 Pins 1 & 2 closed THIRD SERIAL PORT ADDRESS SELECT Port 3 (CN4) JB2/G JB2/H » COM3 Pins 1 & 2 Pins 2 & 3 closed closed COM1 Pins 1 & 2 Pins 1 & 2 closed closed COM2 Pins 2 & 3 Pins 1 & 2 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed THIRD SERIAL PORT INTERRUPT SELECT IRQ JB4/C » IRQ4 Pins 1 & 2 closed IRQ3 Pins 2 & 3 closed FOURTH SERIAL PORT ADDRESS SELECT Port 4 (CN3) JB2/E JB2/F » COM4 Pins 1 & 2 Pins 2 & 3 closed closed COM1 Pins 2 & 3 Pins 1 & 2 closed closed COM2 Pins 1 & 2 Pins 1 & 2 closed closed Disabled Pins 2 & 3 Pins 2 & 3 closed closed FOURTH SERIAL PORT INTERRUPT SELECT IRQ JB4/D » IRQ3 Pins 2 & 3 closed IRQ4 Pins 1 & 2 closed INTERRUPT SELECT IRQ JB6/I JB6/J JB3/E JB3/F JB3/G JB3/H IRQ11 Open Open Open Open Closed Open IRQ10 Closed Open Open Open Open Closed IRQ12 Closed Closed Open Closed Open Open IRQ15 Open Closed Closed Open Open Open BASE MEMORY ADDRESS SELECT Address JB6/B JB6/C » C8000h Open Open CC000h Open Closed D8000h Closed Open DC000h Closed Closed LED SOURCE CONFIGURATION Setting JB5 » LED functions with IDE activity Pins 2 & 3 closed LED functions with SCSI activity Pins 1 & 2 closed LED funtions with both IDE and Pins 4 & 5 closed SCSI activity